MobileAccess Distributed Antenna System (DAS)
Flexible & Scalable Digital Infrastructure for Indoor Coverage & Capacity
概要
Reliable mobile coverage is essential to productivity, customer satisfaction, and operational success. Yet building materials often block outdoor signals, leaving costly gaps in connectivity. MobileAccess DAS solves this by delivering secure, high-capacity coverage throughout your facility with a purpose-built network - ensuring employees stay productive, customers stay connected, and your business is prepared for the demands of a mobile-first world.
主なメリット
Enhanced User
Experience
通話の切断やデータ速度の低下をなくし、中断のない通信とモバイル・アプリケーションへのアクセスを保証します。
Scalable
Solutions
小規模な企業からスタジアムや空港のような広大な会場まで、さまざまな環境に対応します。
Supports Multiple Carriers & Technologies
Accommodates various mobile operators and is adaptable to evolving technologies, including 5Goverlay with SISO/MIMO configurations.
Reliable E911
Connectivity
Venue 4G & 5G coverage will allow people to call E911 during any emergency or crisis
MobileAccess 6000 Distributed Antenna System
MobileAccess 6000 is Airspan’s purpose-built Digital DAS, delivering high-capacity, scalable in-building wireless coverage for large venues and high-traffic environments. Its flexible architecture and compact footprint enable efficient deployments while minimizing total cost of ownership.
- Scalable, Flexible Architecture - Supports multi-operator, multi-band deployments with advanced topologies (e.g., daisy-chaining, BTS Hotel) for efficient network design
- High Performance, Lower TCO - Compact - complete range of low, medium and high power - remotes and reduced infrastructure requirements lower power, space, and overall deployment costs while maintaining strong performance in high-traffic environments
- Proven & Easy to Manage - Built on standard IP and fiber infrastructure with software-driven management for simplified operations and long-term scalability
The RIU provides an interface and signal conditioning to signals coupled between the base station RF antenna ports and the DCU. The RIU is band specific.
The DCU converts aggregated RF signals to CPRI for the downlink and CPRI to RF for the uplink, supporting both FDD and TDD bands (600 MHz to 4000 MHz).
The DEU is the central hub and distribution element for the MobileAccess 6000 G2 Solution. The DEU interfaces between the DCU and the remote unit, allowing it to receive the operators’ service signals in CPRI format, and to route these signals to the remote antenna units.
The dLRU is a low-power remote antenna unit with 20~27 dBm per MIMO stream per band output RF power and native support of 2x2 MIMO antenna scheme. It is ideal for multi-operator, multiband high capacity deployments across small-to-large building coverage areas. The dLRU cooling is natural convection with no fans. Due to its IP66 enclosure design the dLRU can also be installed outdoors.
The dMRU is a medium-power remote antenna unit with 36~40 dBm per MIMO stream per band output RF power and native support of 2x2 MIMO antenna scheme. It is ideal for multi-operator, multiband high capacity deployments across small-to-large building coverage areas. The dMRU cooling is based on natural convection with no fans. Due to its IP65 enclosure design, the dMRU can also be installed outdoors.
The dHRU is a high-power modular remote antenna unit which provides 43~46 dBm output RF power per service module, and native support of 2x2 MIMO antenna scheme. It is ideal for multi-operator, multiband high capacity deployments across small-to-large building coverage areas. The dHRU cooling is based on natural convection with no fans. Due to its IP65 enclosure design, the dHRU can also be installed outdoors.
MobileAccess 6200 Distributed Antenna System
MobileAccess 6200 is Airspan’s enterprise-focused Digital DAS solution, delivering ultra-high capacity and precision coverage for medium to large venues and mission-critical environments. Its flexible architecture supports both fiber-to-the-edge and hybrid fiber-coax deployments, enabling targeted performance and greater design flexibility while supporting seamless convergence of public and private networks.
- Flexible, High-Capacity Architecture - Supports fiber-to-the-edge and hybrid fiber-coax deployments to optimize performance, coverage, and cost across medium to large, high-traffic environments
- Advanced Multi-Operator Platform - Supports all sub-6 GHz bands with seamless integration of public and private networks on a single neutral-host infrastructure
- Future-Ready & Software-Driven - O-RAN support, real-time optimization, and automated configuration enable scalable, efficient network evolution
Access Unit Chassis
The Access Unit Chassis provides coupling access to radio signal sources of multi-operator, multi-system, and multi-band, forming digital optical signals and distributing static capacity distribution to fiber- connected slave devices.
Active Combiner Module
The Active Combiner Module is the interface to the operator base station signal source equipment. The ACM is band specific.
Expansion Unit
The Expansion Unit serves as the interface between the Primary Access Unit and the Remote Unit for the capacity expansion of system.
Expansion Unit Gateway
The Expansion Unit Gateway provides flexible support for 10G and 25G optical ports, enabling simultaneous connectivity to H2RU and N3/M3/X3RU interfaces.
N2RU Low Power Remote
The N2RU is a low-power remote unit optimized for cellular connectivity over fiber optic cable using the CPRI protocol. It is ideal for multi-operator, multiband deployments across small-to-large building coverage areas. The N2RU supports low and mid-band configurations, as well as 2.5 TDD, with SISO or 2x2 MIMO antenna schemes.
M2RU Medium Power Remote
The M2RU is a medium-power remote unit designed for cellular connectivity over fiber optic cable via the CPRI protocol. It is well-suited for multi-operator, multiband deployments in small-to-large building coverage areas. The M2RU supports a 2x2 MIMO antenna scheme for mid-bands and 2.5 TDD configurations.
H2RU High Power Remote
The H2RU is a high-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. It is well-suited for multi-operator, multiband deployments in small-to-large building coverage areas. The H2RU supports SISO antenna scheme for low and mid-bands configurations.
N3RU Low Power Remote
The N3RU is a low-power remote unit designed for cellular connectivity over fiber optic cable via the CPRI protocol. It is optimized for multi-operator, high-capacity multiband deployments in small-to-large building coverage areas. The N3RU supports low and mid-band configurations, along with 2.5, 3.5, and 3.7 GHz TDD bands, using SISO or 2x2 MIMO antenna schemes.
M3RU-L Medium Power Remote
The M3RU is a medium-power remote unit optimized for cellular connectivity over fiber optic cable using the CPRI protocol. It is ideal for multi-operator, multiband deployments across small-to-large building coverage areas. The M3RU supports a SISO antenna scheme for low and mid-band configurations, as well as 2.5 TDD.
M3RU-H-25 Medium Power Remote
The M3RU-H is a medium-power remote unit tailored for 2.5 GHz TDD, supporting SISO or 2x2 MIMO antenna schemes. It enables cellular connectivity over fiber optic cable using the CPRI protocol.
M3RU-H-3537 Medium Power Remote
The M3RU-H is a medium-power remote unit designed for 3.5 and 3.7 GHz C-Band TDD, supporting SISO antenna scheme. It facilitates cellular connectivity over fiber optic cable using the CPRI protocol.
H2RU High Power Remote
The H2RU is a high-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. It is well-suited for multi-operator, multiband deployments in small-to-large building coverage areas. The H2RU supports SISO antenna scheme for low and mid-bands configurations.
X3RU High Power Remote
The X3RU is a high-power remote unit designed for cellular connectivity over fiber optic cable using the CPRI protocol. It is ideal for multi-operator, multiband deployments across small-to-large building coverage areas. The X3RU supports 2x2 MIMO or 4x4 MIMO antenna schemes for 2.5, 3.5, and 3.7 GHz TDD bands.
ケーススタディ
Mobileaccess 6000 Digital DAS At Charlotte Douglas International Airport (Clt)
As one of the busiest aviation hubs in the United States, Charlotte Douglas International Airport (CLT) serves as a vital gateway for business, leisure, and international travel. To support its evolving connectivity needs, the City of Charlotte has long partnered with Wireless Services to design, deploy, and manage its mobile network. With passenger volumes growing and expectations for seamless, high-performance connectivity rising, the airport recently set out to modernize its mobile infrastructure to better serve an increasingly dynamic and diverse traveler base. Following a comprehensive year-long evaluation, Wireless Services selected Airspan’s MobileAccess (MA) 6000 as the foundation for CLT’s wireless modernization. The MA6000 is a Digital DAS platform that converts RF signals into digital format at the source and distributes them over fiber
Latest News & Events
